Monitor Control Function; Opening/Closing The Monitor; Power Off; Switching The Monitor's Picture - Kenwood Excelon KVT-911DVD Instruction Manual

Monitor Control Function

ATT
V
O
L
V.SEL
ATT
B
D
C
;;;
Screen Mode
;;; yyy
[ FULL ]
;;;
;;; yyy
;;; yyy
[ JUST ]
;;; yyy
;;; yyy
[ NORMAL ]
;;; yyy
8
A
OPEN
EJECT
TI
SOURCE
TRACK/TUNE
DISC/BAND
SCREEN
EJECT
TI
SOURCE
E
[ ZOOM ]
[ CINEMA ]
A

Opening/Closing the Monitor

Opening the Monitor
1
Set the vehicle's parking brake.
2
Press the OPEN button. The monitor will open.
3
Once the monitor is fully out, lift it by hand and
set it to an easily visible angle.
V
O
L
Closing the Monitor
Set the lower the monitor so that it is completely
flat.
The monitor is then drawn in automatically after
one second.
2 CAUTION
The gear shift lever or other parts may interfere
with the monitor when it opens. If so, move the
gear shift lever (being sure to do so safely) before
operating the set. (The monitor is drawn back in
automatically if it cannot be opened normally due
to an obstacle.)
NOTE
• The monitor cannot be opened unless the
parking brake is set.
• The position to which the monitor slides when
the power is turned on can be set. (Refer to the
screen control screen( Page 9).)
A

Power Off

•Hold down the OPEN button for one second or
more to turn the set's power off.
•Press the OPEN button to turn the power on.
B

Switching the Monitor's Picture

Each time you press the V.SEL button, the
monitor's picture switches as follows:
∞
Source control screen
∞
DVD, VCD or CD picture
∞
TV or Video picture
∞
Navigation picture
NOTE
When the "AV-IN2" setting to "Back Camera",
the switching items become the Back Camera
picture. (Refer to system setup screen. (page 12))
2CAUTION
You cannot view television and video pictures
whilst the vehicle is moving. To enjoy television
and video pictures, find a safe place to park and
engage the parking brake.
SCR EEN
EJE CT
V.SE L
TI
SOU RCE
ATT