Clock Adjustment Function; Turning The Automatic Time Adjustment On/Off; Adjusting The Time Manually; Setting The Minutes To "00 - Kenwood Excelon KVT-911DVD Instruction Manual

Clock Adjustment Function

Clock Adjustment Screen
A
B
Turning the Automatic Time
Adjustment On/Off
With automatic time adjustment, you can set
the clock time automatically according to time
data sent from RDS stations (after receiving
RDS signals for several minutes). You can also
set the time manually if the automatic time
adjustment function is turned off. The factory
default is automatic time adjustment.
Touch [ SYNC ] to switch the function on and off.
" ON "
Tune into an RDS station for 3 or 4 minutes The
time adjusts automatically to the correct local time
" OFF "
Manual adjusting
NOTE
The time is not adjusted when the RDS station you
are tuned to be not transmitting a time signal.
Choose another RDS station in such a case.
A

Adjusting the Time Manually

Touch [ 5 ] to
advance the hours.
Touch [ ∞ ] to make
the hours go back.
NOTE
No display when the "SYNC" is set to "ON".
14
B
C
Touch [ 5 ] to advance
the minutes.
Touch [ ∞ ] to make
the minutes go back .
C

Setting the Minutes to "00"

Touch [ RESET ] to set the minutes to "00".
NOTE
Touch [ RESET ] whilst the minute is below "30"
rounds it off, and whilst the minute is "30" or
more rounds it up.