Ending The Sound Effect Menu Screen; Audio Control Function; Audio Control Screen; Adjusting The Bass Level - Kenwood Excelon KVT-911DVD Instruction Manual

Audio Control Function

Audio Control Screen

A
B
G
F
A

Adjusting the Bass Level

• Each time you touch [
increased.
• Each time you touch [
decreased.
NOTE
No display this item when the DS-P900/P901 is
connected.
B

Adjusting the Treble Level

• Each time you touch [
increased.
• Each time you touch [
decreased.
NOTE
No display this item when the KDS-P900/P901 is
connected.
C

Adjusting the Balance Levels

• Each time you touch [
left channel is emphasized.
• Each time you touch [
right channel is emphasized.
D
Adjusting the Non-Fader Levels <N-F>
<When the KDS-P900/P901 is not connected>
• Each time you touch [
increased.
• Each time you touch [
decreased.
D
Adjusting the Sub Woofer Levels <SUB>
<When the KDS-P900/P901 is connected>
• Each time you touch [
increased.
• Each time you touch [
decreased.
NOTE
You cannot operate when the "Sub Woofer" is
set to "OFF" on the digital effect setting Screen
( see.P.47 ).
44
C D E
H
I J
], the bass level is
], the bass level is
], the treble level is
], the treble level is
](L), the sound in the
](R), the sound in the
], the non-fader level is
], the non-fader level is
], the sub woofer level is
], the sub woofer level is
Sound Preset Screen
K
O
M N
H

Adjusting the Fader Levels

• Each time you touch [
front channel emphasized.
• Each time you touch [
rear channel emphasized.
F

Turning the Loudness On/Off

This function amplifies low and high tones
when the volume is turned down.
The LOUD indicator is displayed on the source
control screen, when the loudness function is
on.
Each time you touch [ LOUD ] to switch the
function on and off.
NOTE
No display this item when the KDS-P900/P901 is
connected.
G

External Amp Control

Adjust the bass boost level of the external
amplifier using the main unit.
Each time you touch [ Amp Ctrl ] to switch the
Bass boost level as follows:
" OFF "
Bass boost level is flat.
" MODE1 "
Bass boost level is low (+6dB).
" MODE2 "
Bass boost level is high (+12dB).
NOTE
Refer to the catalog or instruction manual for
power amplifiers that can be controlled from this
unit.
I

Adjusting the Volume Offset

Set the sound level of the each source selected
by adjusting the level difference between the
basic sound level and the required level.
• Each time you touch [ 3 ], the level is increased.
• Each time you touch [ 2 ], the level is
decreased.
L
P
Q
R
](F), the sound in the
](R), the sound in the