Quick Effect Screen; Adjusting The Balance Levels; Adjusting The Fader Levels; Recalling Your Settings Of The Crossover Network/Delay Time - Kenwood Excelon KVT-911DVD Instruction Manual

Quick Effect Screen

A
D
A

Adjusting the Balance Levels

• Each time you touch [
channel is emphasized.
• Each time you touch [
right channel is emphasized.

Adjusting the Fader Levels

D
• Each time you touch [
channel emphasized.
• Each time you touch [
channel emphasized.
E
Recalling Your Settings of the Crossover
Network/Delay time
<When the KDS-P900/P901 is connected>
Touch [ 1 ] - [ 6 ] for the desired Crossover
network and delay time setting.
B

Recalling Your Sound Settings

<When the KDS-P900/P901 is not connected>
Touch [ 1 ] - [ 5 ] for the desired sound preset
setting.
<When the KDS-P900/P901 is connected>
Touch [ 1 ] - [ 3 ] for the desired parametric
equalizer setting.
C

External Amp Control

Adjust the bass boost level of the external
amplifier using the main unit.
Each time you touch [ Amp Ctrl ] to switch the
Bass boost level as follows
" OFF "
Bass boost level is flat.
" MODE1 "
Bass boost level is low (+6dB).
" MODE2 "
Bass boost level is high (+12dB).
NOTE
Refer to the catalog or instruction manual for
power amplifiers that can be controlled from this
unit.
B
F
E
], the sound in the left
], the sound in the
], the sound in the front
], the sound in the rear
C
F

Returning to the Source Control Screen

Touch [ RTN ] to return to the Source Control
Screen.
53