Remotemgmtsettings - D-Link NetDefend DFL-210 Cli Reference Manual

3.39.15. RoutingSettings

3.39.14. RemoteMgmtSettings

Description
Setup and configure methods and permissions for remote management of this system.
Properties
NetconBiDirTimeout
WebUIBeforeRules
WWWSrv_HTTPPort
WWWSrv_HTTPSPort
SSHBeforeRules
HTTPSCertificate
NetconBeforeRules
SNMPBeforeRules
SNMPRequestLimit
SNMPSysContact
SNMPSysName
SNMPSysLocation
SNMPIfDescription
SNMPIfAlias
3.39.15. RoutingSettings
Description
Configure the routing capabilities of the system.
Properties
Specifies the amount of seconds to wait for the administrator to log
in before reverting to the previous configuration. (Default: 30)
Enable HTTP(S) traffic to the security gateway regardless of con-
figured IP Rules. (Default: Yes)
Specifies the HTTP port for the web user interface. (Default: 80)
Specifies the HTTP(S) port for the web user interface. (Default: 443)
Enable SSH traffic to the security gateway regardless of configured
IP Rules. (Default: Yes)
Specifies which certificate to use for HTTPS traffic. (Optional)
Enable netcon traffic to the security gateway regardless of configured
IP Rules. (Default: Yes)
Enable SNMP traffic to the security gateway regardless of configured
IP Rules. (Default: Yes)
Maximum number of SNMP packets that will be processed each
second. (Default: 100)
The contact person for this managed node. (Default: N/A)
The name for this managed node. (Default: N/A)
The physical location of this node. (Default: N/A)
What to display in the SNMP MIB-II ifDescr variables. (Default:
Name)
What to display in the SNMP ifMIB ifAlias variables. (Default:
Hardware)
Note
This object type does not have am identifier and is identified by the name of the type
only. There can only be one instance of this type.
Chapter 3. Configuration Reference
133