Dhcpserver - D-Link NetDefend DFL-210 Cli Reference Manual

3.12. DHCPServer

3.12. DHCPServer
Description
A DHCP Server determines a set of IP addresses and host configuration parameters to hand out to
DHCP clients attached to a given interface.
Properties
Name
Interface
IPAddressPool
Netmask
DefaultGateway
Domain
LeaseTime
DNS1
DNS2
NBNS1
NBNS2
NextServer
LogEnabled
LogSeverity
Comments
3.12.1. DHCPServerPoolStaticHost
Description
Static DHCP Server host entry
Properties
Specifies a symbolic name for the DHCP Server rule. (Identifier)
The source interface to listen for DHCP requests on. This can be a single
interface or a group of interfaces.
A range, group or network that the DHCP Server will use as IP address
pool to give out DHCP leases from.
Netmask sent to the DHCP Client.
Specifies what IP should be sent to the client for use as default gateway. If
unspecified or if 0.0.0.0 is specified, the IP given to the client will be sent
as gateway. (Optional)
Domain name used for DNS resolution. (Optional)
The time, in seconds, that a DHCP lease should be provided to a host after
this the client have to renew the lease. (Default: 86400)
IP of the primary DNS server. (Optional)
IP of the secondary DNS server. (Optional)
IP of the primary Windows Internet Name Service (WINS) server that is
used in Microsoft environments which uses the NetBIOS Name Servers
(NBNS) to assign IP addresses to NetBIOS names. (Optional)
IP of the primary Windows Internet Name Service (WINS) server that is
used in Microsoft environments which uses the NetBIOS Name Servers
(NBNS) to assign IP addresses to NetBIOS names. (Optional)
IP address of next server in the boot process. (Optional)
Enable logging. (Default: No)
Specifies with what severity log events will be sent to the specified log re-
ceivers. (Default: Default)
Text describing the current object. (Optional)
73
Chapter 3. Configuration Reference