Ethernetaddress - D-Link NetDefend DFL-210 Cli Reference Manual

3.2.2. EthernetAddress

Comments
3.2.1.5. IP4HAAddress
Description
Use an IP4 HA Address item to define a name for a specific IP4 host, network or range for each
node in a high availability cluster.
Properties
Name
Address
UserAuthGroups
NoDefinedCredentials
Comments
3.2.2. EthernetAddress
The definitions here are the same as in Section 3.2.1.1, "EthernetAddress".
3.2.3. EthernetAddressGroup
The definitions here are the same as in Section 3.2.1.2, "EthernetAddressGroup".
3.2.4. IP4Address
The definitions here are the same as in Section 3.2.1.3, "IP4Address".
3.2.5. IP4Group
The definitions here are the same as in Section 3.2.1.4, "IP4Group".
3.2.6. IP4HAAddress
The definitions here are the same as in Section 3.2.1.5, "IP4HAAddress".
but has no credentials (user names or groups) defined. This means
that the object only requires that a user is authenticated, but ig-
nores any kind of group membership. (Default: No)
Text describing the current object. (Optional)
Specifies a symbolic name for the network object. (Identifier)
An IP address with one instance for each node in the high availab-
ility cluster.
Groups and user names that belong to this object. Objects that fil-
ter on credentials can only be used as source networks and destin-
ations networks in rules. (Optional)
If this property is enabled the object requires user authentication,
but has no credentials (user names or groups) defined. This means
that the object only requires that a user is authenticated, but ig-
nores any kind of group membership. (Default: No)
Text describing the current object. (Optional)
58
Chapter 3. Configuration Reference