D-Link NetDefend DFL-210 Cli Reference Manual page 108

3.23. IPRule
SLBMonitorTCP
SLBPingUseSharedIP
SLBTCPUseSharedIP
SLBPingInterval
SLBPingMaxLoss
SLBTCPInterval
SLBTCPMaxLoss
SLBTCPPorts
SLBDistribution
SLBWindowTime
SLBAddresses
MultiplexArgument
LogEnabled
LogSeverity
Comments
Enable monitoring using TCP packets. (Default: No)
Use the shared IP of a HA cluster instead of the private IP of the
node. (Default: Yes)
Use the shared IP of a HA cluster instead of the private IP of the
node. (Default: Yes)
Ping interval in milliseconds. (Default: 10000)
Ping maximum packet loss. (Default: 5)
TCP interval in milliseconds. (Default: 10000)
TCP maximum packet loss. (Default: 5)
Specifies which ports will be monitored.
Specifies the algorithm used for the load distribution tasks.
(Default: RoundRobin)
Specifies the window time used for counting the number of
seconds back in time to summarize the number of new connec-
tions for connection-rate algorithm. (Default: 10)
The IP addresses of the servers in the server farm.
Specifies how the traffic should be forwarded and translated.
Enable logging. (Default: No)
Specifies with what severity log events will be sent to the spe-
cified log receivers. (Default: Default)
Text describing the current object. (Optional)
Note
If no Index is specified when creating an instance of this type, the object will be
placed last in the list and the Index will be equal to the length of the list.
Chapter 3. Configuration Reference
98