D-Link NetDefend DFL-210 Cli Reference Manual page 73

3.4.4. ALG_SMTP
VerifySenderEmail
MaxEmailPerMinute
FileListType
FailModeBehavior
File
VerifyContentMimetype
Antivirus
ScanExclude
CompressionRatio
CompressionRatioAction
Comments
3.4.4.1. ALG_SMTP_Email
Description
Used to whitelist or blacklist an E-mail sender/recipient.
Properties
Index
Type
Action
Email
Comments
Enable to verify sender E-mail address. (Default: No)
Specifies the maximum amount of E-mails per minute.
(Optional)
Specifies if the file list contains files to allow or deny. (Default:
Block)
Standard behaviour on error: Allow or Deny. (Default: Deny)
List of file types to allow or deny. (Optional)
Verify that file extentions correspond to the MIME type.
(Default: No)
Disabled, Audit or Protect. (Default: Disabled)
List of files to exclude from antivirus scanning. (Optional)
A compression ratio higher than this value will trigger the ac-
tion in Compression Ratio Action, a value of zero will disable
all compression checks. (Default: 20)
The action to take when high compression threshold is viol-
ated, all actions are logged. (Default: Drop)
Text describing the current object. (Optional)
The index of the object, starting at 1. (Identifier)
Specifies if the E-mail address is the sender or the recipient. (Default: Sender)
Specifies whether to whitelist (allow) or blacklist (deny) this address. (Default:
Blacklist)
Specifies the Recipient E-mail to blacklist or whitelist.
Text describing the current object. (Optional)
Note
If no Index is specified when creating an instance of this type, the object will be
placed last in the list and the Index will be equal to the length of the list.
Chapter 3. Configuration Reference
63