Icmpsettings - D-Link NetDefend DFL-210 Cli Reference Manual

3.39.6. ICMPSettings

ReassTimeout
ReassTimeLimit
ReassDoneLinger
ReassIllegalLinger
3.39.6. ICMPSettings
Description
Settings related to the ICMP protocol.
Properties
ICMPSendPerSecLimit
SilentlyDropStateICMPErrors
3.39.7. IPSecTunnelSettings
Description
Settings for the IPsec tunnel interfaces used for establishing IPsec VPN connections to and from this
system.
Properties
IPsecMaxTunnels
IPsecMaxRules
IKESendInitialContact
IKESendCRLs
Note
This object type does not have am identifier and is identified by the name of the type
only. There can only be one instance of this type.
Note
This object type does not have am identifier and is identified by the name of the type
only. There can only be one instance of this type.
Amount of IPsec tunnels allowed (0 = automatic). (Default: 0)
Amount of IPsec rules allowed (0 = automatic). (Default: 0)
Send 'initial contact' messages. (Default: Yes)
Send CRLs in the IKE exchange. (Default: Yes)
Timeout of a reassembly, since previous received fragment.
(Default: 65)
Maximum lifetime of a reassembly, since first received frag-
ment. (Default: 90)
How long to remember a completed reassembly (watching for
old dups). (Default: 20)
How long to remember an illegal reassembly (watching for
more fragments). (Default: 60)
Maximum number of ICMP responses that will be sent each
second. (Default: 500)
Silently drop ICMP errors regarding statefully tracked open
connections. (Default: Yes)
128
Chapter 3. Configuration Reference