Highavailability - D-Link NetDefend DFL-210 Cli Reference Manual

3.17. HighAvailability

3.17. HighAvailability
Description
Configure the High Availability cluster parameters for this system.
Properties
Enabled
ClusterID
SyncIface
NodeID
HASyncBufSize
HASyncMaxPktBurst
HAInitialSilence
Enable high availability. (Default: No)
A (locally) unique cluster ID to use in identifying this group of HA se-
curity gateways. (Default: 0)
Specifies the interface used for state synchronization.
Master or Slave. (Default: Master)
How much sync data, in KB, to buffer while waiting for acknowledg-
ments from the cluster peer. (Default: 1024)
The maximum number of state sync packets to send in a burst.
(Default: 20)
The time to stay silent on startup or after reconfiguration. (Default: 5)
Note
This object type does not have am identifier and is identified by the name of the type
only. There can only be one instance of this type.
Chapter 3. Configuration Reference
82