Access - D-Link NetDefend DFL-210 Cli Reference Manual

3.1. Access

• PSK, page 113
• RadiusServer, page 114
• RemoteManagement, page 115
• RoutingRule, page 118
• RoutingTable, page 119
• ScheduleProfile, page 121
• Service, page 122
• Settings, page 125
• SSHClientKey, page 138
• ThresholdRule, page 139
• UpdateCenter, page 141
• UserAuthRule, page 142
• ZoneDefenseBlock, page 144
• ZoneDefenseExcludeList, page 145
• ZoneDefenseSwitch, page 146
3.1. Access
Description
Use an access rule to allow or block specific source IP addresses on a specific interface.
Properties
Index
Name
Action
Interface
Network
LogEnabled
LogSeverity
Comments
The index of the object, starting at 1. (Identifier)
Specifies a symbolic name for the object.
Accept, Expect or Drop. (Default: Drop)
The interface the packet must arrive on for this rule to be carried out. Excep-
tion: the Expect rule.
The IP span that the sender must belong to for this rule to be carried out.
Enable logging. (Default: No)
Specifies with what severity log events will be sent to the specified log receiv-
ers. (Default: Default)
Text describing the current object. (Optional)
54
Chapter 3. Configuration Reference