Recording Your Telephone Conversation; Erasing Messages - Panasonic KX-TS620CB Operating Instructions Manual

Recording Your Telephone Conversation

You can record your conversation while talking using the handset or {SP-PHONE/
HEADSET}.
1
During a conversation, press {MESSAGE/2WAY REC}.
• "Recording" is displayed.
2
Continue your conversation.
3
To stop recording the conversation, press {MESSAGE/2WAY REC} or
{STOP}.
• The MESSAGE indicator flashes (only when the Answering System is ON).
• When you record your 2-way telephone conversation, you should inform the other party
that the conversation is being recorded.

Erasing Messages

The unit will announce the remaining recording time after playback, if it is less than
3 minutes. New messages cannot be recorded when:
— "Memory full" is heard.
— " Message full" is displayed.
— The MESSAGE indicator flashes rapidly (only when the Answering System is
).
ON
Erase some, or all, of the messages. We recommend you erase unnecessary
messages after each playback.
Erasing a specific message
Press {ERASE} while the message you want to erase is being played.
• The unit erases the message.
• A short beep will sound and the unit will continue to play the next message.
Erasing all messages
All recorded messages, except the greeting message, can be erased at one time.
1
Press {ERASE}.
• "To erase all messages press ERASE
again" is heard.
2
Within 10 seconds, press
{ERASE} again.
• A long beep sounds and "No message"
is heard. The display shows
"
message
• The information in the Caller List will not be
erased. To erase Caller List information, see
page 32.
".
Answering System
MESSAGE Indicator
{ERASE}
49