Table of Contents
Advertisement
Call Display Service
To overwrite, press {OK}
(Yes key).
To select the other empty Direct
Dial memory, press {
and press an empty Direct Dial
button ({M1}, {M2} or {M3}).
• A long beep sounds.
• The display will return to the Caller
List. You can continue storing other
items. To exit the programming
mode, press {EXIT} or wait for 60
seconds.
• To erase other stored items from the
Direct Dial memory see page 39.
• To cancel during programming, press
{EXIT}. Start again from step 1.
• You cannot store caller information in the
Direct Dial memory if a phone number is
not displayed.
Erasing Caller List
Information
After checking the Caller List, you can
erase some or all of the entries.
Make sure that the handset is on the
cradle, the AC adaptor is connected
and the SP-PHONE/HEADSET
indicator light is off.
To erase a specific caller from
the Caller List
1
Press {
} or {
4
Caller List.
2
Scroll to the caller you want to
erase from the Caller List by
pressing {
4
SMITH,JACK
111-444-7777
1
32
} (No key)
3
} to enter the
3
} or {
3
}.
:
5 AM NOV.23
3
Press {ERASE}.
• A long beep sounds and the
information is erased.
• After a few seconds, the display will
show the previous caller
information.
• To exit the Caller List, press {EXIT}
or wait for 60 seconds.
To erase all entries in the
Caller List
Before erasing all entries, make sure
that "
missed call
step 1.
1
Press {
} or {
4
Caller List.
2
Press {ERASE}.
3
Press {OK} (Yes key).
• A long beep sounds and all entries
are erased.
• The unit will exit the Caller List.
Erased
" is displayed at
} to enter the
3
All erased
Hide quick links:
Advertisement
Table of Contents
