Table of Contents
Advertisement
Settings
10
Press {OK} (Save key).
• A long beep sounds.
• The clock starts working.
• The display will return to step 2. To
exit the programming mode, press
{EXIT} or wait for 60 seconds.
• You can go back to the previous screen by
3
pressing {
}, when setting the time and
date (steps 3 through 9).
• If 3 beeps sound when entering the time
and date, the time and date entered are
not correct. Enter the correct time and
date.
After recover from power failure, "
flash. Readjust the time and date
For Call Display service users
(p. 25)
If a time display service is available with
the Call Display service:
• The Call Display information will re-set
the clock after the ring if the adjusted
time and/or date is incorrect and the
Time Adjustment set to ON
time/date has not previously been set,
the Call Display information will not
adjust the clock.
14
Display Language
You can select either "English" or
"French" as the display language.
Your phone comes from the factory set
to "English".
Make sure that the handset is on the
cradle, the AC adaptor is connected
and the SP-PHONE/HEADSET
indicator light is off.
1
" will
2
.
3
4
(p. 16)
. If the
5
• You can exit the programming mode any
• The clock setting will automatically change
Press {FUNCTION/EDIT}.
Scroll to "Change language?"
by pressing {
Press {OK} (Yes key).
Select "English" or "Français"
by pressing {
Language
: English
Press {OK} (Save key).
• A long beep sounds.
• The display will return to step 2. To
exit the programming mode, press
{EXIT} or wait for 60 seconds.
time by pressing {EXIT}.
to 24-hour format if you set the LCD
display language to "French".
} or {
4
3
}.
} or {
4
3
}.
[OK]=Save
Hide quick links:
Advertisement
Table of Contents
