Adjusting The Front Wheel Static Balance - Yamaha MBK YQ100 Service Manual

X
1
FRONT WHEEL AND BRAKE DISC
X
1
X
2
6-9
5.Tighten:
• Wheel axle
• Brake caliper bolts
Wheel axle
35 Nm (3.5 m • kg)
Brake caliper bolt
23 Nm (2.3 m • kg)
WARNING
Make sure the brake hose is routed properly.
CAUTION:
Before tightening the axle nut, stroke the
front fork several times to check for proper
fork operation.
EAS00548
ADJUSTING THE FRONT WHEEL STATIC
BALANCE
NOTE:
• After replacing the tire, wheel or both, the front
wheel static balance should be adjusted.
• Adjust the front wheel static balance with the
brake disc installed.
1.Remove:
• Balancing weight(s)
2.Find:
• Front wheel's heavy spot
NOTE:
Place the front wheel on a suitable balancing
stand.
a.Spin the front wheel.
b.When the front wheel stops, put an "X1" mark
at the bottom of the wheel.
c. Turn the front wheel 90° so that the "X1" mark
is positioned as shown.
d.Release the front wheel.
e.When the wheel stops, put an "X2" mark at the
bottom of the wheel.
f. Repeat steps (c) through (f) several times until
all the marks come to rest at the same spot.
g.The spot where all the marks come to rest is
the front wheel's heavy spot "X".
CHAS