Adjusting The Front Wheel Static Balance - Yamaha 2012 TMAX XP500A Service Manual

d. Install the new oil seals
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
2. Install:
• Air valve
TIP
• Fasten air valve nut "1" and tighten air valve
locknut "2" to 3.0 Nm (0.30 m·kgf, 2.2 ft·lbf).
• When installing the air valve, orient the air
valve referring to the illustration.
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Tighten the air valve nut "1".
Air valve nut
2.0 Nm (0.20 m·kgf, 1.4 ft·lbf)
b. Tighten the air valve locknut "2" while hold-
ing the air valve nut so as not to turn the
nut.
Air valve locknut
3.0 Nm (0.30 m·kgf, 2.2 ft·lbf)
a. 45°–55°
A. Wheel rotation direction
B. Left side
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
EAS21970
ADJUSTING THE FRONT WHEEL STATIC
BALANCE
TIP
• After replacing the tire, wheel or both, the
front wheel static balance should be
adjusted.
• Adjust the front wheel static balance with the
brake disc installed.
1. Remove:
• Balancing weight(s)
2. Find:
• Front wheel's heavy spot
TIP
Place the front wheel on a suitable balancing
stand.
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Spin the front wheel.
b. When the front wheel stops, put an "X
mark at the bottom of the wheel.
c. Turn the front wheel 90° so that the "X
mark is positioned as shown.
d. Release the front wheel.
4-23
FRONT WHEEL
"
1
"
1