Assembling The Carburetor - Yamaha MBK YQ100 Service Manual

CARBURETOR
6.Check :
•Throttle valve free movement
Unsmooth/Stickiness → Replace.
Insert the throttle valve
body
322015
7.Check :
•throttle stop screw
•air screw
•needle
•starter plunger
Damage/Wear → Replace.
322016
NOTE:
The float height is factory-adjusted. Never try to
adjust it yourself.
EAS00487

ASSEMBLING THE CARBURETOR

CAUTION:
Before assembling the carburetor, wash all
of the parts in a petroleum-based solvent.
Always use a new gasket.
1.Install :
• needle
• clip
• throttle valve
• spring seat
• spring
322018
5-5
CARB
into the carburetor
and check for smooth movement.
Jet needle clip position :
3/5