Assembling And Installing The Front Brake Master Cylinder - Yamaha MBK YQ100 Service Manual

10¡
FRONT BRAKE
EAS00596
ASSEMBLING AND INSTALLING THE
FRONT BRAKE MASTER CYLINDER
WARNING
• Before installation, all internal brake
components should be cleaned and
lubricated with clean or new brake fluid.
• Never use solvents on internal brake
components.
Recommended brake fluid
DOT #3 or DOT #4
1.Install:
• master cylinder kit
In the master cylinder.
2.Install:
• brake master cylinder
• brake master cylinder bracket
3.Install:
• copper washers
• brake hose
• union bolt
Union bolt
23 Nm (2.3 m • kg)
WARNING
Proper brake hose routing is essential to
insure safe scooter operation. Refer to
"CABLE ROUTING" in Chapter 2.
NOTE:
• While holding the brake hose, tighten the
union bolt as shown.
• Turn the handlebar to the left and to the right
to make sure the brake hose does not touch
other parts (e.g., wire harness, cables, leads).
Correct if necessary.
6-22
CHAS