Installing The Rear Brake - Yamaha MBK YQ100 Service Manual

a
LS
REAR WHEEL AND BRAKE
3.Measure:
• Brake drum inside diameter a
Out of specification → Replace the wheel.
4.Check:
346008
• Brake drum inner surface
Oil deposits → Clean.
Remove the oil with a rag soaked in lacquer thin-
ner or solvent.
Scratches → Repair.
Lightly and evenly polish the scratches with an
emery cloth.
5.Check:
• Brake camshaft
Damage/wear → Replace.
WARNING
When inspecting the brake lining, do not spill
oil or grease on the brake lining.

INSTALLING THE REAR BRAKE

Reverse the removal procedure.
Note the following points.
1.Install:
• Brake camshaft
NOTE:
Apply lithium soap base grease onto the brake
camshaft
CAUTION:
After installing the brake camshaft, remove
the excess of grease.
346009
2.Install:
•Tension springs
•Brake shoes
NOTE:
The punch mark
CAUTION:
When installing the springs and the brake
shoes, take care not to damage the springs.
346010
6-14
CHAS
Brake drum inside diameter limit
(maximum)
130.5 mm
and pin .
must point outwards.