Secondary Sheave Installation - Yamaha MBK YQ100 Service Manual

V-BELT, CLUTCH AND
SECONDARY/PRIMARY SHEAVE
E
E

SECONDARY SHEAVE INSTALLATION

When assembling the secondary sheave, re-
verse the disassembly procedure. Note the
following points.
1. Apply :
• BEL-RAY assembly lube
(to the inside of the sliding/fixed sheave)
2. Install :
• Sliding sheave
NOTE:
Be careful so that the oil seal
turned over when installing the sheave.
3. Apply :
• BEL-RAY assembly lube
(to the torque cam grooves and O-rings)
4. Install :
• Guide pin 1
5. Check :
• Sliding sheave
Unsmooth operation→Repair.
6. Install :
• Clutch securing nut
Use clutch spring holder
Clutch spring holder :
90890-01337
7. Tighten :
• Clutch securing nut
Use Flywheel holding tool
Flywheel holding tool :
90890-01235
4-24
ENG
®
lips are not
®
50 Nm(5.0 m.kg)