Routes - D-Link NetDefend DFL-210 Cli Reference Manual

2.2.48. routes

2.2.48. routes
Display routing lists.
Description
Display information about the routing table(s):
- Contents of a (named) routing table.
- The list of routing tables, along with a total count of route entries in each table, as well as how
many of the entries are single-host routes.
Note that "core" routes for interface IP addresses are not normally shown. Use the -all switch to
show core routes also.
Use the -switched switch to show only switched routes.
Explanation of Flags field of the routing tables:
O Learned via OSPF
X Route is Disabled
M
Route is Monitored
A Published via Proxy ARP
D Dynamic (from e.g. DHCP relay, IPsec, L2TP/PPP servers, etc.)
H HA synced from cluster peer
Usage
routes [-all] [<table name>] [-switched] [-flushl3cache] [-num=<n>]
[-nonhost] [-tables] [-lookup=<ip address>] [-verbose]
Options
-all
-flushl3cache
-lookup=<ip address>
-nonhost
-num=<n>
-switched
-tables
-verbose
Also show routes for interface addresses.
Flush Layer 3 Cache.
Lookup the route for the given IP address.
Do not show single-host routes.
Limit display to <n> entries. (Default: 20)
Only show switched routes and L3C entries.
Display list of named (PBR) routing tables.
Verbose.
57
Chapter 2. Command Reference