Vlan - D-Link NetDefend DFL-210 Cli Reference Manual

3.28.9. VLAN

Comments
3.28.9. VLAN
Description
Use a VLAN to define a virtual interface compatible with the IEEE 802.1Q Virtual LAN standard.
Properties
Name
Ethernet
VLANID
IP
Network
DefaultGateway
Broadcast
PrivateIP
Metric
AutoSwitchRoute
AutoInterfaceNetworkRoute
AutoDefaultGatewayRoute
PrioCopyPolicy
Comments
Text describing the current object. (Optional)
Specifies a symbolic name for the interface. (Identifier)
Specifies on which Ethernet interface the virtual LAN is
defined.
Specifies the virtual LAN ID used for this virtual LAN inter-
face. Two virtual LANs cannot have the same VLAN ID if
they are defined on the same Ethernet interface. (Default: 0)
Specifies the IP address of the virtual LAN interface, if other
than the IP of the Ethernet interface.
Specifies the network address of the virtual LAN interface.
The default gateway of the virtual LAN interface. (Optional)
Specifies the broadcast address of the virtual LAN interface.
(Optional)
The private IP address of this high availability node.
(Optional)
Specifies the metric for the auto-created route. (Default: 100)
Enable transparent mode, which means that a switch route is
added automatically for this virtual LAN interface. (Default:
No)
Automatically add a route for this virtual LAN interface using
the given network. (Default: Yes)
Automatically add a default route for this virtual LAN inter-
face using the given default gateway. (Default: Yes)
Set the QoS to VLAN priority copy policy. (Default: Inherit-
FromPhys)
Text describing the current object. (Optional)
128
Chapter 3. Configuration Reference