L2Tpserversettings; Lengthlimsettings - D-Link NetDefend DFL-210 Cli Reference Manual

3.51.10. L2TPServerSettings

IPRF
StripDFOnSmall
MulticastIPEnetOnMismatch
3.51.10. L2TPServerSettings
Description
PPTP/L2TP server settings.
Properties
L2TPBeforeRules
PPTPBeforeRules

3.51.11. LengthLimSettings

Description
Length limitations for various protocols.
Properties
MaxTCPLen
MaxUDPLen
MaxICMPLen
MaxGRELen
MaxESPLen
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
Pass L2TP connections sent to the security gateway directly to the L2TP
engine without consulting the ruleset. (Default: Yes)
Pass PPTP connections sent to the security gateway directly to the PPTP
engine without consulting the ruleset. (Default: Yes)
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
TCP; Sometimes has to be increased if tunneling protocols are used.
(Default: 1480)
UDP; Many interactive applications use large UDP packets, may
otherwise be decreased to 1480. (Default: 60000)
ICMP; May be decreased to 1480 if desired. (Default: 10000)
Encapsulated (tunneled transport), used by PPTP. (Default: 2000)
IPsec ESP; Encrypted communication. (Default: 2000)
How to handle the IP Reserved Flag, if set; it should never be.
(Default: DropLog)
Strip the "DontFragment" flag for packets of this size or smal-
ler. (Default: 65535)
What action to take when ethernet and IP multicast addresses
does not match. (Default: DropLog)
173
Chapter 3. Configuration Reference