D-Link NetDefend DFL-210 Cli Reference Manual page 131

3.30. IPRule
SLBMaxSlots
SLBNetSize
SLBNewPort
SLBMonitorPing
SLBPingPollingInterval
SLBPingSamples
SLBPingMaxPollFails
SLBPingMaxAverageLatency
SLBMonitorTCP
SLBTCPPorts
SLBTCPPollingInterval
SLBTCPSamples
SLBTCPMaxPollFails
SLBTCPMaxAverageLatency
SLBMonitorHTTP
SLBHTTPPorts
SLBHTTPPollingInterval
SLBHTTPSamples
SLBHTTPMaxPollFails
SLBHTTPMaxAverageLatency
SLBHTTPURLType
SLBHTTPRequestURL
SLBHTTPExpectedResponse
SLBDistribution
SLBWindowTime
Specifies maximum number of slots for IP and network stick-
iness. (Default: 2048)
Specifies network size for network stickiness. (Default: 24)
Rewrite destination port to this port. (Optional)
Enable monitoring using ICMP Ping packets. (Default: No)
Delay in milliseconds between each ping interval. (Default:
5000)
Specifies the number of attempts to use for statistical calcula-
tions. (Default: 10)
Specifies the maximum number of failed ping attempts until
host is considered to be unreachable. (Default: 2)
Specifies the max average latency for the sample attempts.
(Default: 800)
Enable monitoring using TCP handshakes. (Default: No)
Specifies the ports that will be monitored.
Delay in milliseconds between each TCP handshake.
(Default: 10000)
Specifies the number of attempts to use for statistical calcula-
tions. (Default: 10)
Specifies the maximum number of failed TCP attempts until
host is considered to be unreachable. (Default: 2)
Specifies the max average latency for the sample attempts.
(Default: 800)
Enable monitoring using HTTP requests. (Default: No)
Specifies the ports that will be monitored. (Default: 80)
Delay in milliseconds between each monitor interval.
(Default: 10000)
Specifies the number of attempts to use for statistical calcula-
tions. (Default: 10)
Specifies the maximum number of failed HTTP attempts until
host is considered to be unreachable. (Default: 2)
Specifies the max average latency for the sample attempts.
(Default: 800)
Defines how the request URL should be interpreted. (Default:
FQDN)
Specifies the HTTP URL to monitor.
Expected HTTP response.
Specifies the algorithm used for the load distribution tasks.
(Default: RoundRobin)
Specifies the window time used for counting the number of
131
Chapter 3. Configuration Reference