Ospf - D-Link NetDefend DFL-210 Cli Reference Manual

2.2.43. ospf

-num=<Integer>
-verbose
<IP Address>
<pool name>
2.2.43. ospf
Show runtime OSPF information.
Description
Show runtime information about the OSPF router process(es).
Note: -process is only required if there are >1 OSPF router processes.
Usage
ospf
Show runtime information.
ospf -iface [<interface>] [-process=<OSPF Router Process>]
Show interface information.
ospf -area [<OSPF Area>] [-process=<OSPF Router Process>]
Show area information.
ospf -neighbor [<OSPF Neighbor>] [-process=<OSPF Router Process>]
Show neighbor information.
ospf -route [{HA | ALT}] [-process=<OSPF Router Process>]
Show the internal OSPF process routingtable.
ospf -database [-verbose] [-process=<OSPF Router Process>]
Show the LSA database.
ospf -lsa <lsaID> [-process=<OSPF Router Process>]
Show details for a specified LSA.
ospf -snoop={ON | OFF} [-process=<OSPF Router Process>]
Show troubleshooting messages on the console.
ospf -ifacedown <interface> [-process=<OSPF Router Process>]
Take specified interface offline.
Maximum number of items to list (default: 20).
Verbose (more information).
Translated IP.
NAT Pool name.
52
Chapter 2. Command Reference