Operating Instructions
4.
Roll up three putties around the cables. Stuff putties little into the hole to
prevent the water from getting inside. Use last putty to fix the spot.
Notes
•
Please confirm Network Camera operation before puttying the cables.
Putties and Self Bonding tape cannot be used twice.
•
Please check the length and the type of the Ethernet cable before fixing
with putty.
5.
Roll up the Self Bonding tape over the puttied cables.
•
Network Camera needs Self Bonding tape to mount on the wall or the
ceiling. Please leave half of Self Bonding tape.
5 –10 mm
6.
Connect the Ethernet cable to the Ethernet port of hub, the broadband router
or the PC.
92
Three putties
Roll up by extending
the Self Bonding tape.
Last putty
Do not cover
the ventilation hole.