Notes
•
Do not turn off the power during the Reset to Factory Default. It may
interrupt the Network Camera operation.
•
IP address and Subnet Mask should be set newly after Resetting to
Factory Default.
•
CLEAR SETTING button can also reset the Network Camera to the
Factory Default. Please refer to 5.1 Network Camera reset
procedure—default settings.
•
Internal clock will not be erased, however time mode will return to AM/
PM mode and Auto adjustment will be disabled.
•
If Reset to Factory Default is used, all user settings will be lost. You will
have to reconfigure the entire Network Camera.
Operating Instructions
87