2.
Enter each parameter in the proper data field. Click [Save] when finishing.
•
Click [Cancel] to quit the current settings. It returns to the Setup Page
without saving the parameters.
3.
Click [Restart Now!] to restart to make the changed parameters effective.
Port No.
Instructions for the data fields
•
You can set up the port no. of the Network Camera.
(Default is 80.)
If you use more than one Network Camera with a
broadband router on the network, each Network Camera
must be assigned its own port no.
•
Please refer to Port Forwarding feature on Page 32.
•
Many ISP's intentionally block port no. 80 to guard
against certain network viruses. If your ISP blocks port
no. 80, please substitute another unused port no.
•
Enter only the number. (1—65535)
Note
Certain port nos. assigned on the network devices, and
the network protocol are not available e.g., FTP: 20, 21,
Telnet: 23, SMTP: 25, DNS: 53, POP3: 110, HTTPS:
443, ICQ: 4000 and IRC: 6661—6667. The port nos.
between 50000 and 59999 are recommended to use. To
assign port nos. on a large network, please consult and
work with the ISP or administrator.
Operating Instructions
53