Panasonic KX-HCM230 Operating Instructions Manual page 73

Instructions for the data fields
a.
Buffers or transfers by the timer trigger.
b.
Active Time of Trigger
Always: always activates the timer trigger. The timer trigger interval
can be set in e. Image Buffer Frequency Setting.
Operational between: Sets the starting and stopping time of the
primary time. The day of the week can be set by checking. If the setting
time passes over midnight, please check the check box of only the day
of Starting time.
Starting and stopping time is set only in 24 h time mode.
Note
The first image is buffered or transferred at the starting time. The later
images are buffered or transferred at the interval of the e. Image Buffer
Frequency Setting.
c.
Secondary time is active except the primary time.
The timer trigger interval in the secondary time can be set in e. Image
Buffer Frequency Setting.
d.
Sets the image resolution and image quality.
Image resolution: 640 x 480/320 x 240/160 x 120
Image quality: Favour Clarity/Standard/Favour Motion
e.
Image Frequency: Sets the interval to send the image.
Note
Short interval of Image Buffer Frequency makes Network Camera
transfer the older images. Please set the interval long enough to
transfer the images. Buffered Image screen enables you to check this
setting.
Operating Instructions
73