Panasonic KX-HCM230 Operating Instructions Manual page 56

Operating Instructions
Name/Time
Name/Time window is used to assign a name to each Network Camera. Date
and Time entered on the Name/Time window are used for the Alarm/Timer mode
in the Image Transfer feature and on the Buffered Image screen. NTP
automatically adjusts the internal clock of the Network Camera.
1.
Click [Name/Time] on the Setup Page.
2.
Enter the Camera Name and Date and Time. Click [Save] when finishing.
• Click [Cancel] to quit the current settings. It returns to the Setup Page
without saving the parameters.
Camera
Name
Date and
Time
56
Instructions for the data fields
The Camera Name appears on the Single Camera screen.
• Please refer to unavailable character set 1 on Page 101.
• Please refer to displayable character set on Page 102.
First click [AM/PM] or [24H]. The display changes in each time
mode.
Note
The temperature will affect the time setting. The time
setting may lose one minute per month in 25°C condition. It
may lose five minutes in a colder or hotter condition. Please
use Auto Adjustment feature when Network Camera is
installed where the temperature changes hugely in daytime
and nighttime.