Panasonic KX-HCM230 Getting Started

Getting Started

Please read the Operating Instructions for the details.
Keep this leaflet for the future reference.
The suffix of each model number is omitted.

Included Accessories

Main Unit
Connector Cover
Note
If any items are missing, please contact the dealer immediately.

Network Camera Configuration Type

The Network Camera can be connected over the LAN/Intranet and the Internet. Please select from
the four Network Camera configuration types. Network parameters differ depending on the Network Camera
configuration type.
[Type 1]
LAN/Intranet Connection with an
Ethernet
Network Camera can be installed on the LAN/Intranet.
LAN/Intranet
1
* Network traffic can be smooth by using the Ethernet switching
hub.
[Type 3]
Internet Direct Connection
with a Modem
Network Camera can be installed alone without PC on the
network. When you set up the Network Camera in [Type 3],
please connect the Network Camera temporarily in [Type 1],
[Type 2] or [Type 4].
Internet
Note
Most of the xDSL services use PPPoE. Network Camera
does not support PPPoE. If the Internet connection
requires PPPoE, please connect with the router supporting
PPPoE like [Type 2].
Printed in Japan
Flexible Stand AC Adaptor
Putties
Rubber Cap
Switching Hub
®
Ethernet switching hub * 1
Modem
Model No.
AC cord
1 set Self Bonding
(4 pcs.)
tape
[Type 2] Internet Connection with a
Broadband Router
Network Camera can be accessed from the Internet.
The broadband router needs Port Forwarding (IP Masquerade)
feature on Page 32 in the Operating Instructions.
Modem
Internet
CATV
xDSL
Optical cable
[Type 4] Direct Connection with a PC
Network Camera can be installed with the PC directly.
Note
Please use Category 5 cross cable when connecting directly
with the cable to the PC.

Network Camera

KX-HCM230
Sunshade
Screws for
Screws 5 pcs.
Flexible Stand
3 pcs.
Broadband
Router
WAN
LAN
Category 5 cross cable
PSQX2811YA
Setup
CD-ROM
KK1102RM0