Non Transfer mode
Non Transfer mode enables [Start Capture] on the operation bar to buffer the
image on the Single Camera screen. Please refer to Page 44. Capture Control can
lock [Start Capture] on the operation bar to prevent the user from capturing the
Buffered Image. Click [Clear Buffered images] to clear the buffered image.
[Clear Buffered images] does not save the parameters.
1.
Click [Image Transfer] on the Setup Page.
2.
Select the each parameter. Click [Save] when finishing.
•
Click [Cancel] to quit the current settings. It returns to the Setup Page
without saving the parameters.
Operating Instructions
65