Information - Panasonic KX-TVP50 Getting Started

Procedure - Part 3 (things the Message Manager should do)
c) The VPS plays the entered prompt number. Press 1 to change the prompt.
d) The VPS plays the current recording. Press 1 to change the prompt.
e) Press 1 to record a new prompt.
f) Record the prompt at the tone and press 1.
g) Press 2 to accept the prompt.
h) Record other prompts by repeating Steps (6)b) through (6) g).
5. This completes Part 3 of the setup procedure.

Information

FIG.1 - System Connection of VPS and PBX (example)
KX-TVP50
(VPS)
LED
12
Getting Started
If a prompt has not yet been recorded, go to Step (6)f). (If you wish to turn off a certain
prompt, please first record a "dummy" prompt. Then go back to Step (6) and you will be
able to turn it off by going through these steps.)
Note
• Press 2 to return to Step (6) b).
Note
• Press 2 to keep the current recording — return to Step (6) b).
Note
• Press 2 to erase the current recording — return to Step (6) b).
• Press 3 to turn off the specified prompt — return to Step (6) b).
Note
• Press 1 to review the prompt.
• Press 3 to erase the prompt and try again and return to Step (6) e).
• Press
to erase the prompt and return to Step (6) b).
DIP
Switch
PORT 1
PORT 2
KX-TD series
(PBX)
• • • • • •
DPT
with
display
• •