Panasonic KX-TVP50 Getting Started page 15

Supplementary Procedure for CE countries
5. KX-TVP50 system parameters have been adjusted to your PBX. Disconnect the power from
the KX-TVP50.
CAUTION: Set the DIP switch to position 0 (see
6. Restore power to the KX-TVP50.
*: Following parameters will be automatically adjusted to your PBX.
• "Operator's Extension" ··· Table 41 in B5.1 Automated Attendant Parameters
• "Call Waiting Sequence" ··· Table 70 in B7.3 PBX Interface Parameters
• "Flash Time" ··· Table 66 in B7.2 Port Setting
• "Numbering Plan 1-16" ··· Table 56 in B6.7 Other Parameters
• "Extension Number of VPS Port 1" and "Extension Number of VPS Port 2"··· Table 69 in B7.3 PBX
Interface Parameters
• "Paging Code for Group 1-8" and "Paging Code for All Groups" ··· Table 62 in B6.7 Other
Parameters
right illustration) after the adjustment.
0 1
1
0 1 2
0 1 3
0 1 4
(Position 0)
Getting Started
15