Table of Contents
Advertisement
1.
2.
C
6QQNU OO #NNGP MG[
10 mm spanner
1.
6QQNU OO #NNGP MG[
x
®
INVACARE
SPIN
All manuals and user guides at all-guides.com
BACKREST
A
B
C
D
Height adjustment, fixed backrest.
1. Use a pair of scissors and remove the plastic ties
(A) at the bottom of the backcloth. Then fold the
chair slightly, by lifting the seat upwards.
2. Remove screws (B) on the back of the backrest
tube with an Allen key. It is now possible to lower
and raise the back. Fasten the screws and nuts and
tighten.
When adjusting the height, the embossed mark
(C) on the backrest tube must NEVER be vis-
ible above the frame tube. Otherwise the back-
rest may come loose and cause serious injury.
Make sure that the backrest is safely secured.
Height adjustment, foldable backrest.
1. Loosen screws (C) on the back of the backrest
tube with an Allen key. It is now possible to lower
and raise the back. Retighten the screws.
NOTE! Don't touch the lower screws (D).
When you have fitted the backrest in the cor-
rect position, it is important that you check
thoroughly that the screws are tightened
securely. This is important for your own
safety!
13
Advertisement
Table of Contents
