Table of Contents
Advertisement
6. Trigger for Mobile
Trigger for Mobile
Trigger for Mobile- - - - Originated call type (Bearer):
Trigger for Mobile
Originated call type (Bearer):
Originated call type (Bearer): This box controls the mechanism used by the
Originated call type (Bearer):
terminal to select the bearer type for mobile originated calls. By default, "Bearer capability" is set as
the trigger in this text box. There is also an option under the drop down arrow to set the trigger to use
the MSN rather than the bearer. Most ISDN devices correctly signal the call type (speech, 3.1KHz
audio, UDI, RDI) via the bearer capability. If there is a problem, this field can be changed to use the
MSN number instead.
Once all changes have been made, click on "Apply". Any changes to this screen require a re-boot of the
terminal to save the new configuration. Use the power button on the GX-9 or the "Restart Terminal"
button to gracefully re-boot the GX-9.
Note:
Note: Different MSNs can be used for any of the ISDN call types above, but the ISDN equipment must be
Note:
Note:
programmed with the same MSN to accept incoming calls, and different numbers must be used for
speech, audio and UDI/RDI calls.
Glocom GX-9 (FB250 Class) Operating Manual
27
Advertisement
Table of Contents
