Aca; Aca Settings For Tes With Tatic Address - Inmarsat GX-9 Operating Manual

ACA

This web page allows you to use Automatic Context Activation (ACA) in either of two ways;
1)using static IP addresses in the PC or other TE device to establish an automatic PDP context with
any QoS that is offered by the network (upper half of the web page) or
2) using the DHCP from the GX-9 and establishing an automatic background PDP context for any PC
or other TE that connects to the GX-9 (lower part of the web page).
ACA settings for TEs with Static IP address: ACA settings for TEs with Static IP address: ACA settings for TEs with Static IP address: ACA settings for TEs with Static IP address:
You can esteblish a range of static IP addresses for setting up an automatic PDP context with any of
the QoS's offered by the network.
To turn on a particular range of addresses, select the "On" radio button and choose a range of
addresses, low and high to use (e.g. 192.168.128.1 to 192.168.128.10).
Next select the desired QoS for that range of IP addresses (e.g. 32K streaming). The APN listed is
the default APN read from the USIM card (bgan.inmarsat.com). If your USIM is provisioned for more
than one APN, then you can type a secondary APN in this field.
Next, if your Service Provider requires a UN and PW, enter it in the next two fields.
22
Glocom GX-9 (FB250) Operating Manual