Table of Contents
Advertisement
The longer the Idle-mode DHCP lease time, the longer it will take the Network/GX-9 to update the
PC or other TE with the correct DNS servers used for web browsing after establishing a PDP
context.
4. Connected
Connected- - - - mode DHCP Lease Time:
mode DHCP Lease Time: The Connected-mode DHCP Lease Time refers to the
Connected
Connected
mode DHCP Lease Time:
mode DHCP Lease Time:
DHCP lease duration when the GX-9 is connected to the network. Most Users will have no need
to change this parameter.
5. PIN and PUK
PIN and PUK: The PIN and PUK fields indicate whether the PIN or PUK needs to be entered to
PIN and PUK
PIN and PUK
unlock the terminal. When grayed out they indicate the PIN is not required or is already satisfied.
6. Bypass Antenna Pointing:
Bypass Antenna Pointing: This parameter allows the User to bypass antenna pointing and have
Bypass Antenna Pointing:
Bypass Antenna Pointing:
the GX-9 go straight into Registering with the Network. This is turned "on" as default for the GX-
9.
7. Auto Power On:
Auto Power On:
Auto Power On:
Auto Power On: This parameter is used when the User wants the GX-9 to power up
automatically if AC/DC power is applied to the GX-9.
8. 24/7 PDP Keep Alive:
24/7 PDP Keep Alive:
24/7 PDP Keep Alive: This is setting allows retaining a PDP context indefinitely. Note:
24/7 PDP Keep Alive:
parameter should not be checked unless you have a critical need to keep the PDP context alive
for critical information. This is not a good use of satellite resources.
9. Satellite Selectio
Satellite Selection: n: n: n: This parameter is used within a satellite overlap region and allows the user to
Satellite Selectio
Satellite Selectio
override the default satellite (normally selected by the GX-9 based upon elevation angle/GPS
location) and select a different satellite. Note:
reset. When set to AUTO the GX-9 will select the satellite based on the GPS position. When set
to a specific satellite it will attempt to use that satellite only. Be careful to select the correct
satellite for your position and note the time periods when the specific satellites are valid.
10. Net mode
Net mode
Net mode: Most users will use NAT mode for their application. Bridge mode requires the PC or
Net mode
other TE to be intelligent enough to handle two IP addresses and to be able to route traffic to
either address. One address is the GX-9's private IP address and the other is the public IP
address assigned by the network when a PDP context is activated.
11. Streaming Activity Timer:
Streaming Activity Timer: This allows the user to turn On an inactivity timer for a Streaming QoS
Streaming Activity Timer:
Streaming Activity Timer:
connection. The timer is in seconds and will tear down a streaming context after X X X X seconds of
inactivity.
12. Emergency Call Numbers:
Emergency Call Numbers: Allows the User to update the emergency call number that is
Emergency Call Numbers:
Emergency Call Numbers:
applicable in that part of the world where the terminal is being used.
13. A A A A pply, Cancel, and Restart Terminal buttons:
pply, Cancel, and Restart Terminal buttons:
pply, Cancel, and Restart Terminal buttons:
pply, Cancel, and Restart Terminal buttons: These buttons are self explanatory.
Glocom GX-9 (FB250 Class) Operating Manual
Note:
Note: This change does not take affect until the GX-9 is
Note:
Note: This
Note:
Note:
13
Advertisement
Table of Contents
