Inmarsat GX-9 Operating Manual page 11

There is no need to check the active interface. All interfaces can be used
simultaneously to accommodate multiple users.
Note
During initial setup, the terminal can only be configured using either a USB or an
Ethernet connection. Once the terminal has been configured, all five interfaces (USB,
RJ-11, Ethernet, WLAN and ISDN) can be used for data transfer depending on the
Note
service required.
Your computer must be configured to support your chosen connection method. Refer to
the documentation supplied with your computer for details.
Glocom GX-9 (FB250 Class) Operating Manual
5