Table of Contents
Advertisement
S
P
ETUP
AGE
The Setup page allows the user to configure various parameters of the GX-9. A description of each item
on the screen follows:
1. Terminal Local IP Address
Terminal Local IP Address: This allows the User to change the local IP address of the terminal
Terminal Local IP Address
Terminal Local IP Address
from the default 192.168.128.100 IP address. Only the last two octets are available to change.
Once the local IP address is changed on this page and applied, the IP address ranges for the
DHCP server, the PDP Context page and ACA page will also be changed automatically. Note:
Updates to this field will not take affect until the GX-9 is rebooted.
2. DHCP Address Range:
DHCP Address Range: This allows the User to set the range of DHCP addresses that are given
DHCP Address Range:
DHCP Address Range:
out by the GX-9 to any connected PC or other Terminal Equipment (TE).
3. Idle
Idle- - - - mode DHCP Lease Time:
mode DHCP Lease Time: Idle-mode DHCP Lease Time refers to the DHCP lease time
Idle
Idle
mode DHCP Lease Time:
mode DHCP Lease Time:
when the UT is not connected to the network. This parameter allows the User to change the
duration (default is 60 seconds) of the DHCP lease. This parameter was introduced to address a
situation with some models of Cisco routers that will not accept a short DHCP lease time. Note:
12
Glocom GX-9 (FB250) Operating Manual
Note:
Note:
Note:
Note:
Note:
Note:
Advertisement
Table of Contents
