Table of Contents
Advertisement
2. PS Attach Status
PS Attach Status
PS Attach Status
PS Attach Status: This indicates whether the GX-9 is PS (Packet Switch) attached to the
Network. You will need to setup a PDP context in order to send PS data.
3. CS Attached
CS Attached: This indicates whether the GX-9 is CS (Circuit Switch) attached to the Network.
CS Attached
CS Attached
Once you are CS Attached and Registered with the network, you are able to make CS calls.
4. GPS Position:
GPS Position:
GPS Position:
GPS Position: This field displays the current GPS position status. If the GX-9 has received a
GPS position fix and the Network GPS policy has been received then the GPS Fix Quality, Last
Update time and the Position (Latitude, Longitude) will be displayed. Time is GMT.
5. Emergency Call Numbers:
Emergency Call Numbers: This field displays the Emergency call numbers that can be used with
Emergency Call Numbers:
Emergency Call Numbers:
the GX-9.
6. Software
Software Version:
Version: This displays the current version of software that is running on the GX-9.
Software
Software
Version:
Version:
7. Satellite Modem IMEI:
Satellite Modem IMEI: This displays the IMEI number of the GX-9.
Satellite Modem IMEI:
Satellite Modem IMEI:
8. Satellite Modem IMSI
Satellite Modem IMSI: This displays the IMSI number of the USIM card in the GX-9. If is the IMSI
Satellite Modem IMSI
Satellite Modem IMSI
is not displayed, it indicates that there is a problem reading the SIM card, e.g. because there is no
SIM, it is installed incorrectly or PIN must be entered.
9. USIM PIN Status
USIM PIN Status: This field indicates whether the USIM is ready or a PIN needs to be entered. If
USIM PIN Status
USIM PIN Status
the PIN needs to be entered, go to the SETUP page.
10. USIM APN Name:
USIM APN Name: This displays the default APN that has been provisioned on the USIM card.
USIM APN Name:
USIM APN Name:
Note that some USIM cards may have multiple APN's provisioned on them.
11. MS
MS- - - - ISDN 1 thru 4:
ISDN 1 thru 4: Each USIM card has four (4) separate MS-ISDN numbers if the USIM has
MS
MS
ISDN 1 thru 4:
ISDN 1 thru 4:
been provisioned for these services. MS_ISDN 1 is for 4K Speech, MS-ISDN 2 is for 3.1KHz
Audio (fax, etc.), MS-ISDN 3 is for UDI data, and MS-ISDN 4 is for RDI data.
12. Extract System Log:
Extract System Log: Clicking this button allows the User to automatically extract a GX-9 system
Extract System Log:
Extract System Log:
log and save the file to a location on the PC for debugging purposes. This file can be e-mailed to
Glocom directly for fault analysis if the User experiences any problems.
13. Restore factory Defaults:
Restore factory Defaults:
Restore factory Defaults:
Restore factory Defaults: Clicking this button will restore the GX-9 back to factory defaults and
delete any of the user parameters that have been entered in the GX-9. It is recommended that
the user exhaust all possible debug procedures before using this feature.
Glocom GX-9 (FB250 Class) Operating Manual
11
Advertisement
Table of Contents
