Table of Contents
Advertisement
PDP C
ONTEXTS
The PDP Context page allows the User to setup and configure PDP contexts for any PC or other TE that
is connected to the GX-9. To activate a PDP Context, go to the bottom of the page. You will see the
CID, Local IP Address, APN, Requested QoS, Username and Password fields.
1. CID:
CID: The CID of each context is automatic by default. If for some reason the User wants to
CID:
CID:
assign a particular context to a specific CID, use the drop down arrow and select the desired
CID number. Most users will not
2. Local IP Address:
Local IP Address:
Local IP Address: This is the local IP address of the PC or other TE that you want to setup a
Local IP Address:
PDP context for. Note that the first three octets of the IP address will reflect any changes
made in the setup screen to the GX-9 local IP address. You can use the "ipconfig" command
from a "cmd" window to find the IP address of a PC.
3. APN name:
APN name: This field is configurable, but it will always show the default APN that has been
APN name:
APN name:
provisioned on the USIM. If you have a USIM that has been provisioned with multiple APN's,
you can type in any of these secondary APN names as part of the PDP context setup.
4. Requested QoS:
Requested QoS: The drop down list shows all of the different QoS types: background,
Requested QoS:
Requested QoS:
streaming 32K, streaming 64K, streaming 128K, and streaming 256K. Select the appropriate
QoS required for the PDP context that you are setting up.
Glocom GX-9 (FB250 Class) Operating Manual
not need to change this field from the automatic default setting.
not
not
15
Advertisement
Table of Contents
