Table of Contents
Advertisement
WEP S
ECURITY
WEP Protection Status:
WEP Protection Status: Click "On" from the drop down list to enable the Wireless Encryption Protocol
WEP Protection Status:
WEP Protection Status:
(WEP) for added security. When the terminal's WLAN interface is enabled, the WLAN LED is either green
(WEP is enabled) or red (WEP is not enabled). When the LED is red, any computer with a WLAN
interface can detect the terminal's WLAN SSID, and connect to it automatically.
Encryption Level: 64 or 128 bit WEP encryption can be enabled.
Encryption Level:
Encryption Level:
Encryption Level:
WEP Key 1: Default WEP keys are formulated using the IMEI number of the terminal. If you want to use
WEP Key 1:
WEP Key 1:
WEP Key 1:
different WEP keys, please use the following table as a reference when entering the new WEP keys:
Hexadecimal 128-bit: Requires 26 characters. Recommended
Hexadecimal 64-bit: Requires 10 characters
Note:
Note: If WEP is enabled, you must provide WLAN users with the proper WEP key in order for them to
Note:
Note:
connect to the GX-9 terminal. Please write down the WEP key that you use because once entered, there
is no way to view this key again. You will have to disable WEP, reboot the terminal and reset it if the
WEP key is forgotten.
SSID Broadcast: For added security you can choose not to broadcast your SSID.
SSID Broadcast:
SSID Broadcast:
SSID Broadcast:
20
Recommended
Recommended
Recommended
Glocom GX-9 (FB250) Operating Manual
Advertisement
Table of Contents
