Table of Contents
Advertisement
Web-Based Setup and Configuration
The web-based configuration enables a user to setup and configure the
UIP300 using a web browser on their PC. The web-based configuration
provides additional settings not available using the telephone.
Microsoft Internet Explorer v.4.0 or higher must be used.
User Configuration
To access the web-based setup and configuration program:
1. Start the web browser from a PC that is connected to the same IP
network as the UIP300.
2. Check the IP address on the telephone and enter that IP address in the
web browser eg., http://169.254.1.10.
3. When the Enter Network Password screen appears, enter the User Name
and Password. Click OK.
• At default the User Name is user.
• The password is 6 ~ 10 digits. At default the Password is 123456.
Figure 4-6 Web Login Screen
38
Advertisement
Table of Contents
