Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Uniden UCIS 3000
Summary of Contents for Uniden UCIS 3000
- Page 1 UCIS 3000 Call ID on Call Waiting Speakerphone...
-
Page 3: Table Of Contents
Table of Contents Introduction Welcome ... 3 Features ... 3 Important Safety Instructions ... 4 Checking the Package Contents ... 5 Set Up ... 7 Using The Phone ... 9 Pulse And Tone Dialing ... 9 Receiving A Phone Calls ... 9 Placing A Phone Call ... -
Page 4: Introduction Welcome
Introduction Congratulations on your purchase of the Uniden UCIS 3000 corded telephone. This phone is designed for reliability, long life, and outstanding performance. Note: Some illustrations in this manual may differ from the actual unit for explanation purposes. Features • Caller ID and Call Waiting Caller ID •... -
Page 5: Important Safety Instructions
If you cannot resolve the problem, or if the product is damaged, refer to the “UNIDEN Limited Warranty” section of this own- er’s manual. Opening the product or reassembling it in- correctly may expose you to dangerous voltages or other risks, and will void the warranty. -
Page 6: Checking The Package Contents
AC adapter with the same voltages that has a longer cord. NOTE: If any of these items are missing or damaged, contact the Uniden/AVS parts department at (514) 683-1779 x 2264. Hours are from 8:45 a.m. to 5:00 p.m. EST, Monday... - Page 7 Installation First Time Installation 1. Connect the adapter. Plug the large part of the adapter into the wall outlet and the adapter tip to the jack at the rear side of unit. (Use only 9V DC, 200mA, center positive Class 2 adapter.) 2.
-
Page 8: Set Up
Data Port This is a connection which is in parallel with the telephone line. It allows the connection of Device such as a modem, caller ID or an answering machine. The data port is across line . SETTING UP YOUR UNIT Factory Presets The following table shows you the factory settings for your unit:... - Page 9 5. When “SET LDS CODE” appears, press REVIEW UP button to change the long distance code from -, 0, 1, 2, ~9. When you are fin- ished, Press DIAL. The display will indicate as shown (Stand-By Screen) and be ready to receive incoming calls. You have to set the LDS code as “1”...
-
Page 10: Using The Phone
Using Your Telephone Pulse And Tone Dialing 1. If your home is equipped with a touch tone dialing sys- tem, set the TONE switch to the Tone position. 2. If your home is equipped with a rotary (pulse) dialing system, set the PULSE switch to the Pulse position. 3. -
Page 11: Duration Counter
B You can adjust the volume of the caller’s voice by slid- ing the VOLUME CONTROL on the right side of the phone. C After the conversation has finished, press the SPEAKERPHONE button to hang up. 2. To Make A Call A Press and release the SPEAKERPHONE button. -
Page 12: To Store A Phone Number In Memory
To Store A Phone Number In Memory: 1. Press the STORE button, “MEMORY STORING” appears on the display window. 2. Dial the number you want to store in memory. 3. Press STORE again. 4. Press the desire memory location. • To store in an auto memory button (located on right- hand side of base) –... -
Page 13: Pause Button
Pause Button The PAUSE button allows you to insert a 3.6 second pause in the dialing sequence. This is particularly useful if you are con- nected to a PABX system where you must dial an access code (usually the number 9) to obtain an outside line. 1. -
Page 14: Using The Caller Id Function
The CALL WAITING (CW) sym- bol will flash for 16 seconds along with the telephone number and name of the per- son who is on call waiting. Press the FLASH button to put the existing call on hold and an- swer the new call. -
Page 15: Message Light
Using Your Caller ID Telephone Caller ID Service and Call Waiting Caller ID Service The “caller identification” service (Caller ID) allows the call- er’s phone number and/or name to be shown on the display as the call comes in before you pick up the phone. In order to use this feature, YOU MUST FIRST SUBSCRIBE TO THE CALLER ID SERVICE provided by your local telephone com- pany. -
Page 16: Receiving Calls
If You Are In A Area Where An FSK Signal Is Not Available: 1. This unit will check your line for a stutter dial tone every time you hang up or each time a call goes unanswered. The MESSAGE indicator will flash when there is a mes- sage waiting. -
Page 17: Deleting Calls
3. If the NEW symbol is still flashing when the display goes back to the Stand-By screen, there are new calls that you have not yet reviewed. 4. The reviewed number can be stored into any of the auto memory buttons or keypad memory locations by press- ing the STORE button first, then one of the memory but- tons. -
Page 18: Dial Options Button
If “SET AREA CODE” appear prior to “PICKUP PHONE…” or dialing, it means you have not programmed the local area code. Please hang up the telephone and program the area code. 1. If a local call (a telephone number with the same area code as you set) is reviewed and its 7-digit number dis- played, press DIAL to dial the number displayed. -
Page 19: Message Error
If a long distance call, and its 10-digit number is displayed, 1. Pressing OPTIONS once will change it to an 11-digit number (1 + 3-digit area code + 7-digit telephone number). 2. Pressing OPTIONS twice will remove the 3-digit area code and change to display only the 7-digit telephone number. -
Page 20: General Product Care
Maintenance Resetting Your Telephone’s Programming Resetting your telephone’s programming will clear the area code and all of the calls from call memory but your preprogrammed Memory Buttons will not be deleted. You may wish to write any important numbers down before performing a reset. If you wish to clear and/or reset all of your telephone’s pro- gramming for any reason: Disconnect from phone line by removing phone cable... -
Page 21: Questions And Troubleshooting
Troubleshooting If your phone is not performing to your expectations, please try these simple steps first. Symptom Suggestion Phone does not • HI/LOW/OFF ringer switch is set ring to OFF position • Line cord is disconnected at telephone outlet or at telephone end. - Page 22 Symptom Callers are not • Verify that you have subscribed displayed on the screen • Check if your answering machine No caller informa- • Verify that you have subscribed tion is displayed when hearing the call waiting audio sound Message error •...