Displaying The Far Site's Name When The Call Connects; Hearing Audio Confirmation When You Dial - Polycom VSX Series Getting Started Manual

G S G
ETTING TARTED UIDE FOR THE

Displaying the Far Site's Name When the Call Connects

Hearing Audio Confirmation When You Dial

36
VSX S
ERIES
Depending on your system configuration, you can specify whether to display
the far site's name when the call connects and how long to leave the name on
the screen.
To specify when to display the name of the far site:
1. Select System from the Place a Call screen.
2. Select User Settings from the System screen.
3. Select Next to see more settings.
4. Scroll to Far Site Name Display Time, press
control, and select to display the far site's name during the entire call,
for a specified time, or not at all.
5. Press Home to save your change and return to the Place a Call
screen.
Depending on your system configuration, you can set up the system to speak
each number as you enter it in the dialing entry field on the Place a Call
screen.
To enable audio confirmation:
1. Select System from the Place a Call screen.
2. Select User Settings from the System screen.
3. Select Next to see more settings.
4. Scroll to Keypad Audio Confirmation and press
control to enable the option.
5. Press Home to save your change and return to the Place a Call
screen.
If Keypad Audio Confirmation is on and you enter a number while in multipoint call using
an internal MCU, the far sites will hear the numbers as you enter them. If you do not
want the far sites to hear the numbers, mute the system's microphone.
on the remote
on the remote
. . /
WWW POLYCOM COM VIDEODOCUMENTATION