Ending A Video Call - Polycom VSX Series Getting Started Manual

Calling from the Contacts or Speed Dial List
Calling from the Directory

Ending a Video Call

© Polycom, Inc.
You may be able to access calling information for specific sites using the Speed
Dial or Contacts list on the Place a Call screen.
To place a call using the Speed Dial or Contacts list:
1. Select Speed Dial or Contacts from the Place a Call screen.
2. Scroll to the entry you want to call.
3. Press Call to place the call.
The directory is a list of names and numbers that's stored locally on the VSX
system.
If the system is registered with a global directory, the directory also includes
entries from the global directory. Global entries are marked with
types of entries, the name appears with its corresponding number, IP address,
or both.
To place a call from the directory:
1. Press Directory on the remote control.
2. Find the entry to call.
3. Press Call to place the call.
For more information about using the directory, see Working with Directory Entries on
page 19.
Depending on your system configuration, when you make a call using an entry with both
ISDN and IP dialing information, the system may prompt you to choose which way to
place the call.
To hang up from a call:
1. Press Hang Up on the remote control.
2. Confirm that you want to end the call.
If you don't confirm that you want to hang up, the system disconnects the call
automatically after 60 seconds.
C A
ALLING AND NSWERING
. For both
5