Displaying The Far Site's Name When The Call Connects - Polycom ViewStation EX Getting Started Manual

Displaying the Far Site's Name When the Call Connects

© Polycom, Inc.
To specify when to display the PIP:
1. Select System Info from the main screen.
2. Select User Setup from the System Information screen.
3. Scroll to the PIP field, press
settings:
Select this
setting...
Auto
On
Off
4. Press Home to save your change and return to the main
screen. On remote controls that do not have this button, press
Menu.
With this option, you can specify how long to leave the name of the far
site on the screen once the call connects.
To specify how long to display the name of the far site:
1. Select System Info from the main screen.
2. Select User Setup from the System Information screen.
3. Scroll to the Far Site Display Time field and enter the amount
of time to display the far site's name.
4. Press Home to save your change and return to the main
screen. On remote controls that do not have this button, press
Menu.
C
, and select one of these
To show the PIP...
On connection, when you pick up the
remote control, and when you press any
of the camera control buttons.
On connection and during the call.
Never.
Y W
USTOMIZING OUR ORKSPACE
43