Oki MC332dn Startup Manual page 88

Scanning to Computer
Setting the IP address:
1
Press the <SETTING> key on the
operator panel.
4
2
Press the to select [Easy Setup], and
press .
OK
3
Enter the administrator password.
The factory default password is "aaaaaa".
a
Press , ,
character you want, and then
press .
OK
- The selected character is entered as "*" in
the text field.
- If you have entered an incorrect value,
press the <CLEAR> key and then enter
the correct value.
, to select the
b
Repeat step
required are entered.
c
Press the
and press
4
Press the
Setting], and then press the .
5
If setting the IP address manually, check
that [Manual] is selected, and press
If obtaining the IP address automatically, press
the to select [Auto], and press
step 10.
6
Enter the IP address using the ten-key
pad, and press
To move to the next box, press the
7
Enter the subnet mask using the ten-key
pad, and press
To move to the next box, press the
8
Enter the default gateway address using
the ten-key pad, and press
To move to the next box, press the
- 88 -
a
until all characters
and to select [Enter]
.
OK
to select [Network
. Proceed to
OK
.
OK
.
.
OK
.
.
OK
.
.
OK